お使いのコントローラーと、Zorocutが渡すDXF。
Zorocutが書き出しに対応するコントローラーごと、機械メーカーごとに1ページ:ファイルの内容、取り込み方、設定、制限事項、そして正直なステータス。
コントローラーとCAM
CypCut
ベータCypCut 6.x · CypCutPro 7 · CypCutE 7
Bochu's controller software on most small fiber lasers. Zorocut nests and prices the job, then hands CypCut one DXF per sheet on five fixed layers.
FSCUT 2000 / 3000 / 4000
ベータCypCut (FSCUT2000C, 3000, 4000) · CypCutE (FSCUT2000E, 4000E)
Bochu's controller cards. The C models and the 4000 run CypCut, the EtherCAT E models run CypCutE with 17 layers; Zorocut's DXF is the same for all.
HypCut (FSCUT8000)
未検証HypCut · HypTronic · FSCUT8000
Bochu's control software for high-power lasers (FSCUT8000, above 8 kW). It opens DXF only in Flexible production; Zorocut's file should fit, but no HypCut import has been tested.
Raytools XC3000
未検証Raytools XC3000 series
Raytools' XC3000 control software opens DXF and cuts on 7 process layers you assign by selecting contours. Zorocut exports the same DXF as for CypCut; no import tested yet.
SheetCAM (plasma tables)
ベータSheetCAM TNG → FireControl, Mach3, LinuxCNC
The CAM step on most hobby and small plasma tables. Zorocut nests and quotes, SheetCAM adds the toolpaths, your controller runs the G-code.
Hypertherm Phoenix / EDGE Connect
未検証Phoenix DXF Translator · EDGE Connect
Hypertherm's CNC software for plasma tables, the strictest DXF reader we found. Zorocut's lines-arcs-circles file fits its rules on paper; not tested yet.
機械メーカー
各ブランドの機械に搭載されているコントローラー、Zorocutがそれに書き出す内容、そして未確認の点。
Bodor (BodorThinker)
未検証BodorThinker · BodorNest
Bodor's fiber lasers run Bodor's own control system, BodorThinker, which Bodor says reads DXF. Its DXF import rules are not published, so set Other in Zorocut; untested.
HSG Laser
未検証HSG EtherCAT bus control system
HSG describes an EtherCAT bus control system and its own nesting software, but names neither and documents no file import. Set the controller by what your screen shows; untested.
Senfeng
未検証SF-Mimir LS · SF-Nest
Senfeng's H4 brochure names its own SF-Mimir LS control system with SF-Nest; its other brochures name no software. DXF import is not documented: set the controller by your screen; untested.
Gweike
ベータCypCut (GA series)
Gweike's GA-series manual runs the machine from CypCut, Bochu's control software. Set CypCut in Zorocut and map the five ZC_ layers once; beta, built to CypCut's documented import.
Langmuir Systems CrossFire / CrossFire PRO / XR
ベータFireControl · SheetCAM · Fusion
The CrossFire tables run FireControl, which loads G-code only. Zorocut nests and prices the job, SheetCAM with Langmuir's post makes the G-code.
Swift-Cut Pro / XP plasma tables
未検証SwiftCAM · SwiftCNC
Plasma tables with their own CAD, CAM and CNC software on the console. SwiftCAM opens DXF and DWG; Zorocut's per-sheet DXF has not been tried there yet.
PlasmaCAM
未検証DesignEdge
Plasma tables driven directly by PlasmaCAM's own DesignEdge CAD/CAM, with no G-code step. DesignEdge reads CAD files; how it treats Zorocut's DXF is not tested.
- ベータ
- ベンダーが公開している取り込みルールに沿って作成しています。実機のコントローラーでの取り込みは未確認です。
- 未検証
- Zorocutは書き出せますが、DXF取り込みについて、確認できる公開資料がありません。
このページはまだ翻訳されていません。英語の原文をお読みいただいています。
掲載されていないコントローラーをお使いですか?コミュニティで質問し、取り込める内容を教えてください。
質問する製品名は互換性を説明する目的でのみ使用しています。Zorocutは各メーカーとは提携していません。