你的控制器,以及 Zorocut 交給它的 DXF。
每個 Zorocut 支援輸出的控制器與每個機台廠牌各有一頁:檔案內容、如何匯入、設定、限制——以及誠實的支援狀態。
控制器與 CAM
CypCut
測試版CypCut 6.x · CypCutPro 7 · CypCutE 7
Bochu's controller software on most small fiber lasers. Zorocut nests and prices the job, then hands CypCut one DXF per sheet on five fixed layers.
FSCUT 2000 / 3000 / 4000
測試版CypCut (FSCUT2000C, 3000, 4000) · CypCutE (FSCUT2000E, 4000E)
Bochu's controller cards. The C models and the 4000 run CypCut, the EtherCAT E models run CypCutE with 17 layers; Zorocut's DXF is the same for all.
HypCut (FSCUT8000)
未測試HypCut · HypTronic · FSCUT8000
Bochu's control software for high-power lasers (FSCUT8000, above 8 kW). It opens DXF only in Flexible production; Zorocut's file should fit, but no HypCut import has been tested.
Raytools XC3000
未測試Raytools XC3000 series
Raytools' XC3000 control software opens DXF and cuts on 7 process layers you assign by selecting contours. Zorocut exports the same DXF as for CypCut; no import tested yet.
SheetCAM (plasma tables)
測試版SheetCAM TNG → FireControl, Mach3, LinuxCNC
The CAM step on most hobby and small plasma tables. Zorocut nests and quotes, SheetCAM adds the toolpaths, your controller runs the G-code.
Hypertherm Phoenix / EDGE Connect
未測試Phoenix DXF Translator · EDGE Connect
Hypertherm's CNC software for plasma tables, the strictest DXF reader we found. Zorocut's lines-arcs-circles file fits its rules on paper; not tested yet.
機台廠牌
各廠牌機台隨附哪種控制器、Zorocut 為它輸出什麼,以及我們尚未驗證的部分。
Bodor (BodorThinker)
未測試BodorThinker · BodorNest
Bodor's fiber lasers run Bodor's own control system, BodorThinker, which Bodor says reads DXF. Its DXF import rules are not published, so set Other in Zorocut; untested.
HSG Laser
未測試HSG EtherCAT bus control system
HSG describes an EtherCAT bus control system and its own nesting software, but names neither and documents no file import. Set the controller by what your screen shows; untested.
Senfeng
未測試SF-Mimir LS · SF-Nest
Senfeng's H4 brochure names its own SF-Mimir LS control system with SF-Nest; its other brochures name no software. DXF import is not documented: set the controller by your screen; untested.
Gweike
測試版CypCut (GA series)
Gweike's GA-series manual runs the machine from CypCut, Bochu's control software. Set CypCut in Zorocut and map the five ZC_ layers once; beta, built to CypCut's documented import.
Langmuir Systems CrossFire / CrossFire PRO / XR
測試版FireControl · SheetCAM · Fusion
The CrossFire tables run FireControl, which loads G-code only. Zorocut nests and prices the job, SheetCAM with Langmuir's post makes the G-code.
Swift-Cut Pro / XP plasma tables
未測試SwiftCAM · SwiftCNC
Plasma tables with their own CAD, CAM and CNC software on the console. SwiftCAM opens DXF and DWG; Zorocut's per-sheet DXF has not been tried there yet.
PlasmaCAM
未測試DesignEdge
Plasma tables driven directly by PlasmaCAM's own DesignEdge CAD/CAM, with no G-code step. DesignEdge reads CAD files; how it treats Zorocut's DXF is not tested.
- 測試版
- 依廠商公開的匯入規則製作;尚未在實機控制器上匯入過。
- 未測試
- Zorocut 可以為它輸出,但我們找不到任何公開的 DXF 匯入說明。
本頁暫時沒有繁體中文版本:你正在閱讀英文原文。
使用的控制器不在列表中嗎?歡迎到社群提問,並告訴我們它能匯入什麼。
提出問題產品名稱僅用於說明相容性。Zorocut 與其製造商無任何關聯。