내 컨트롤러와 Zorocut이 전달하는 DXF.

BodorThinker · BodorNest

Bodor's fiber lasers run Bodor's own control system, BodorThinker, which Bodor says reads DXF. Its DXF import rules are not published, so set Other in Zorocut; untested.

HSG EtherCAT bus control system

HSG describes an EtherCAT bus control system and its own nesting software, but names neither and documents no file import. Set the controller by what your screen shows; untested.

SF-Mimir LS · SF-Nest

Senfeng's H4 brochure names its own SF-Mimir LS control system with SF-Nest; its other brochures name no software. DXF import is not documented: set the controller by your screen; untested.

CypCut (GA series)

Gweike's GA-series manual runs the machine from CypCut, Bochu's control software. Set CypCut in Zorocut and map the five ZC_ layers once; beta, built to CypCut's documented import.

FireControl · SheetCAM · Fusion

The CrossFire tables run FireControl, which loads G-code only. Zorocut nests and prices the job, SheetCAM with Langmuir's post makes the G-code.

SwiftCAM · SwiftCNC

Plasma tables with their own CAD, CAM and CNC software on the console. SwiftCAM opens DXF and DWG; Zorocut's per-sheet DXF has not been tried there yet.

DesignEdge

Plasma tables driven directly by PlasmaCAM's own DesignEdge CAD/CAM, with no G-code step. DesignEdge reads CAD files; how it treats Zorocut's DXF is not tested.